Dell 3110cn Service Manual page 317

Removal 23 ELECTRONIC SUB-SYSTEM CONTROL BOARD (PL9.1.27)
10)
10)
9) Remove the SHIELD ASSY IF by pulling it to the arrow direction together with the ELEC-
TRONIC SUB-SYSTEM CONTROL BOARD.
10) Remove all the screws that fix the connectors of the ELECTRONIC SUB-SYSTEM CONTROL
BOARD to the SHIELD ASSY IF
11) Remove two screws (silver, 6mm) that fix the ELECTRONIC SUB-SYSTEM CONTROL
BOARD to the SHIELD ASSY IF.
12) Remove the ELECTRONIC SUB-SYSTEM CONTROL BOARD from the SHIELD ASSY IF.
13) Release the two hooks on the GUIDE ESS, and then remove the GUIDE ESS from the ELEC-
TRONIC SUB-SYSTEM CONTROL BOARD.
Version 2 2006.03.31
13)-1
13)-2
12)
10)
Chapter 3 Removal and Replacement Procedures (RRPs)
9)
11)
13)-1
11)
3 - 43
Kmy03034KB