Replacement 13 LOW VOLTAGE POWER SUPPLY (PL9.1.4)
1)
Replace LOW VOLTAGE POWER SUPPLY to the SHIELD LVPS by mating the notch on the
LOW VOLTAGE POWER SUPPLY with the tab on the SHIELD LVPS.
2)
Secure the LOW VOLTAGE POWE SUPPLY to the SHIELD LVPS using the six screws (sil-
ver, 6mm).
Continues to the next page.
Version 2 2006.03.31
2)
2)
Chapter 3 Removal and Replacement Procedures (RRPs)
2)
2)
2)
1)
3 - 94
2)
Kmy03107KB