Removal 13 Right Cover (Pl1.1.6) - Dell 3110cn Service Manual

Removal 13 RIGHT COVER (PL1.1.6)

Steps 1 through 3 are for reference. Before removing this component, check that Steps 1 through 3
have been performed.
1) Open the FRONT COVER (PL1.2.1).
2) Remove the FUSER. (Removal 8)
3) Remove the REAR COVER. (Removal 12)
4) Remove threescrews (silver, tap, 10mm) that fix the RIGHT COVER (PL1.1.6) to the printer.
5) Release the two holes on the RIGHT COVER from the bosses on the printer.
6) Release the one backside hook and two frontside hooks on the RIGHT COVER, and then
remove the RIGHT COVER diagonally backward.
Go to the next removal step:
Removal 14 MPF FEED SOLENOID (PL3.1.98), Removal 15 FEED DRIVE ASSEMBLY
(PL8.1.7), Removal 17 FRONT COVER (PL1.2.98), Removal 18 RIGHT ARM ASSEM-
BLY(PL7.1.98), Removal 19 SIZE SWITCH ASSEMBLY (PL7.1.18), Removal 20 POWER
SWITCH (PL9.1.13), Removal 21 TONER CARTRIDGE SENSOR ASSEMBLY (C), (M), (Y)
(PL5.1.4) or Removal 22 LEFT COVER (PL1.1.7)
Version 3 2007.03.15
Chapter 3 Removal and Replacement Procedures (RRPs)
6)-1
4)
5)
6)-1
6)-1
4)
3 - 23
4)
5)
6)-2
Kmy03016KA