Replacement 30 INTEGRATED FEEDER ASSEMBLY (PL3.2.99)
13)
When performing the step described below, ensure that the harness will not be caught
between the CHUTE MSI and the printer.
12) Replace the CHUTE MSI by mating the two bosses on the CHUTE MSI with the holes on the
printer.
13) Secure the CHUTE MSI to the printer using the two screws (silver, tap, 10mm).
Continues to the next page.
Version 3 2007.03.15
Chapter 3 Removal and Replacement Procedures (RRPs)
12)
13)
3 - 126
Kmy03083KB