Replacement 10 PHOTOCONDUCTOR (PC) / DEVELOPER (DEV) DRIVE (PL8.1.2)
1)
Replace the PHOTOCONDUCTOR (PC) / DEVELOPER (DEV) DRIVE by aligning the gear of
each drive of the PHOTOCONDUCTOR (PC) / DEVELOPER (DEV) DRIVE with the holes on
the printer.
2)
Secure the PHOTOCONDUCTOR (PC) / DEVELOPER (DEV) DRIVE to the printer using the
six screws (silver, tap, 10mm).
Continues to the next page.
Version 2 2006.03.31
Chapter 3 Removal and Replacement Procedures (RRPs)
1)
2)
3 - 88
2)
2)
2)
2)
2)
Kmy03111KB