Removal 25 Led Assembly (Pl5.1.15) - Dell 3110cn Service Manual

Removal 25 LED ASSEMBLY (PL5.1.15)

Steps 1 through 4 are for reference. Before removing this component, check that Steps 1 through 4
have been performed.
1) Open the FRONT COVER (PL1.2.1).
2) Remove the FUSER. (Removal 8)
3) Remove the REAR COVER. (Removal 12)
4) Remove the LEFT COVER. (Removal 22)
5) Remove two screws (silver, tap, 8mm) that fix the DUCT SIDE L (PL7.1.23) to the printer.
6) Remove the DUCT SIDE L from the printer.
7) Remove one screw (silver, tap, 10mm) that fixes the LED ASSEMBLY (PL5.1.15) to the
printer.
8) Remove the LED ASSEMBLY from the printer by releasing its two hooks.
9) Disengage the connector (P/J141) of the LED ASSEMBLY.
Version 2 2006.03.31
Chapter 3 Removal and Replacement Procedures (RRPs)
9)
8)-1
3 - 46
8)-1
8)-2
7)
Kmy03037KA
6)
5)
5)