Connectors Location (Exifb-C1); Installing The Exifb-C1 Pcb; Table 2-4 Connectors Of Exifb-C1; Figure 2-11 Connectors Of Exifb-C1 - NEC SL1100 Hardware Manual

SL1100

1.4.3 Connectors Location (EXIFB-C1)

J1
J2
J3
No.
J1 Expansion Connector (Not used)
J2 Expansion Connector
J3 Expansion Connector
J4 Mother PCB
J5, J6 Debug Purpose (Not used)

1.4.4 Installing the EXIFB-C1 PCB

Do Not Power on until all installations have been completed.
1. Turn off the system power and disconnect the AC cord from KSU.
2. Open and pull out the Sub-Cover of the Main KSU.
3. Loosen two screws and pull out the Main-Cover by pressing the two hooks.
2-8
J5

Figure 2-11 Connectors of EXIFB-C1

Table 2-4 Connectors of EXIFB-C1

Connectors
Sub-Cover

Figure 2-12 Removing the Sub-Cover

J6
J4
Connectable Devices
-
Expansion KSU 2
Expansion KSU 1
J1 connector on 084M-B1
-
Sub-Cover
Tab
ISSUE 1.0
Tab
Installation