Wall-Mounting The Dss Console; Figure 2-102 Leg Stopper Of Dss Console; Figure 2-103 High Position Setting - NEC SL1100 Hardware Manual

SL1100
3. Adjust the leg to desired height.
Leg
4. Lead the Line cord through the applicable grooves.
(Refer to Figure 2-101 Cabling of DSS on the previous

5.3.2 Wall-Mounting the DSS Console

1. Lift the leg and lead the cable through the applicable grooves. Refer to
Wall-Mount on the next
2-64

Figure 2-102 Leg Stopper of DSS Console

Figure 2-103 High Position Setting

page. Lower leg to stowed position.
Leg Stopper
< High position >
page)
Figure 2-104 Cabling for
ISSUE 1.0
Installation