SL1100
You can combine normal and daisy-chain connections to create a wide variety of coverage configura-
tions, as long as you have no more than six repeaters per base unit.
6.2.3 Troubleshooting Chart
To review common problems and possible solutions, refer to the Cordless DECT Repeater Guide
DTL-RPT-1.
6.2.4 Turning on the Verification Tone
To activate the verification tone to aid in troubleshooting installation problems, refer to the Cordless
DECT Repeater Guide DTL-RPT-1.
6.2.5 Maintenance
For user maintenance of the repeater, refer to the Cordless DECT Repeater Guide DTL-RPT-1.
6.3 Installing the ML440 and AP20 Wireless DECT Telephone
This section outlines the steps for connecting and mounting the base station, charging the battery, and
powering on the handset.
The following topics are included in this section:
•
Connecting the Base Station on the next page
•
Wall Mounting the Base Station on page 2-90
•
Handset and Charger on page 2-92
2-88
Figure 2-143 Daisy-Chain Layout
ISSUE 1.0
Installation