ISSUE 1.0
WM Support
FM/WM Base-F
2. Refer to
Figure 2-39 Floor-Mount Spacing Guide on this page
holes for 10 mm (0.394") anchor bolts (locally procured).
Mark and drill the four holes required to install the FM/WM Base.
3. Using anchor bolts, secure the FM/WM Base to the floor.
4. Using the four hooks on the FM/WM Base mount the IP4WW-Battery Box on the Base.
Hardware Manual
Figure 2-38 Bases and Support of the Battery Box
AC inlet
side
Front side
Figure 2-39 Floor-Mount Spacing Guide
FM/WM Base-R
for required spacing before drilling
Four Anchor bolts
M10 mm (0.394!)
Wall
Anchor bolt location
: Maintenance space
SL1100
2-25