Wall-Mounting The Ip4Ww-Battery Box; Figure 2-40 Mounting The Battery Box; Figure 2-41 Securing The Battery Box - NEC SL1100 Hardware Manual

SL1100
5. Using four supplied screws, secure the IP4WW-Battery Box to the FM/WM Base.
Two Screws
(M4 X 8)

2.6.2 Wall-Mounting the IP4WW-Battery Box

When wall-mounting the IP4WW-Battery Box, ensure the wall can support the
weight of the Battery Box (Total weight=17.6 kg (620.75 oz) - Including
2-batteries, cord, KSU, etc). The Battery Box is secured to the wall using the
FM/WM BASE. Ensure that enough space is available to allow the installation
of additional KSU.
Plywood should first be installed on the wall where the Battery Box will be positioned. This allows secure
anchoring of the screws which support the weight of the Battery Box.
2-26
Hooks
FM/WM Base
Hooks

Figure 2-40 Mounting the Battery Box

FM/WM Base

Figure 2-41 Securing the Battery Box

IP4WW-Battery Box
IP4WW-Battery Box
Two Screws
(M4 X 8)
ISSUE 1.0
Installation