ISSUE 1.0
Fasten two screws to secure the 2nd PCB to the top of the 080E/008E/1PRIU.
Expansion Interface Card
(2nd PCB)
Nylon-Spacers
Expansion Interface Card
(1st PCB)
Figure 2-65 Mounting the 2nd Expansion Interface Card
6. Following illustration shows an example for installing two expansion PCBs onto the KSU.
2nd PCB
1st PCB
Figure 2-66 Mounting Two Expansion Interface Cards
7. Cut and remove the Plastic Knockouts as required for each Expansion interface card.
Hardware Manual
J1
J2
Screws
Screw position
2nd EXP.
PCB
Both sides are
the same.
Metal-Spacers
SL1100
2-41