Figure 3-13 Inserting The Cf Card; Figure 3-14 Prg90-04 Display; Figure 3-15 Next Prg Display - NEC SL1100 Hardware Manual

SL1100
CF card
2. Turn the power on, enter the Program Mode then PRG90-04.
Program Mode
Base Service OP1 OP2
3. Dial 1 and press Hold key.
4. When the data backup to the CF card is completed, the display changes to the next PRG.
Loading System Data
5. Remove the CF card and exit from the Program Mode.
3-6

Figure 3-13 Inserting the CF card

90-04-01
Data Load YES:1 1

Figure 3-14 PRG90-04 Display

90-05-
Slot Control

Figure 3-15 Next PRG Display

CPU card
CF Slot (CN2)
VMDB
M'tenance
back Select
ISSUE 1.0
|01
System Start Up