Cabling And Setting Ip4Ww-1Priu-C1; Table 2-14 Rj-45 Pri Pin-Outs (S-Bus, T-Bus); Table 2-15 Switch Setting Of 1Priu-C1; Figure 2-76 Connector Of 1Priu-C1 - NEC SL1100 Hardware Manual

ISSUE 1.0

3.4.4 Cabling and Setting IP4WW-1PRIU-C1

This IP4WW-1PRIU-C1 PCB provides one RJ-45 PRI connection.
3.4.4.1 Connector
Following table shows the pin-outs for the RJ-45 cable connector for S-Bus and T-Bus RJ-45 connec-
tions.
8 765 4321
3.4.4.2 Switch Setting
The following figure shows the location of the switches and LEDs on the IP4WW-1PRIU-C1 Card.
1. Set the switches J6 to J9 according to the system, referring the
1PRIU-C1 on this page.
Switch No. Switch Position
J6, J7
J8, J9
2. Connect the cables from the NT1 Network Termination cable to the J5 connector on the 1PRIU-C1
Card.
Hardware Manual
J5
PRI 1
PRI/T1 Line

Figure 2-76 Connector of 1PRIU-C1

Table 2-14 RJ-45 PRI Pin-Outs (S-Bus, T-Bus)

Pin No. RJ-45 Cable Connector- PRI 1
(J5) S-Bus Connection
1
2
3
4
5
6
7
8

Table 2-15 Switch Setting of 1PRIU-C1

2M Connect PRI/E1 (2.048 Mb/s) line
1.5M (default) Connect PRI/T1 (1.544 Mb/s) line
T (default) T-Bus connection
S S-Bus connection
RJ-45 Cable Connector- PRI 1
(J5) T-Bus Connection
TA
TB
-
RA
RB
-
-
-
Table 2-15 Switch Setting of
Description
SL1100
RA
RB
-
TA
TB
-
-
-
2-49