Table of Contents
Advertisement
Assembling the Strain Relief Housing
FIGURE:
Related Information
"Connect the DC Input Power Cords to the Server" on page 91
■
▼ Connect the DC Input Power Cords to the Server
1. Ensure that the circuit breaker to your power source is turned off.
Caution – Do not proceed with these instructions until you have turned off the
power from the DC power source through the circuit breakers.
2. Route the power cables in the rack and secure the cables with nylon tie wraps.
3. Connect the chassis ground wire to the facility earth ground and ensure that
this connection has proper bonding.
Assembling and Installing DC Power Cables for the Sun SPARC Enterprise T5140 Server
91
Advertisement
Table of Contents
