Table of Contents
Advertisement
Server Connections
FIGURE:
Figure Legend
1
Power cables
2
Ethernet cables
3
Service processor to ethernet
4
NET MGT to network (optional)
5. Connect an Ethernet cable between one of the server's NET ports and the
network to which the server will communicate.
6. Determine the input power installation instructions you need, based on the
model or your server (AC or DC input power):
■
■
7. Plug the power cords into the power supplies and into a power source.
44
Sun SPARC Enterprise T5140 and T5240 Servers Installation Guide • December 2010
AC input power models–Continue to the next step.
DC input power models–See
the Sun SPARC Enterprise T5140 Server" on page
5
RJ-45 to DB-25 crossover adapter
6
RJ-45 to DB-9 crossover adapter
7
Terminal device
"Assembling and Installing DC Power Cables for
81.
Advertisement
Table of Contents
