Configure The Service Processor Network Management Port - Oracle Sun SPARC Enterprise T5140 Installation Manual

Table of Contents

Advertisement

-> set /SP/users/root password
Enter new password: ********
Enter new password again: ********
->
Note – After the root password has been set, on subsequent reboots, the ILOM CLI
login prompt is displayed.
2. Enter root for the login name followed by your password.
...
hostname login: root
Password: password (nothing displayed)
Waiting for daemons to initialize...
Daemons ready
Integrated Lights Out Manager
Version 3.0.0.0
Copyright 2009 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
->
Related Information
Sun SPARC Enterprise T5140 and T5240 Servers Administration Guide
▼ Configure the Service Processor Network
Management Port
Note – If your network allows the use of DHCP, this configuration is performed
automatically the first time you boot the system.
Use this procedure only when:
You are unable to use DHCP on your network.
You need to modify the ILOM service processor network management port
settings.
50
Sun SPARC Enterprise T5140 and T5240 Servers Installation Guide • December 2010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sun SPARC Enterprise T5140 and is the answer not in the manual?

This manual is also suitable for:

Sun sparc enterprise t5240

Table of Contents