Cabling Notes For Both Servers; Configure The Host Software - Oracle Sun SPARC Enterprise T5140 Installation Manual

3. Commit the changes to the service processor network parameters. See
"Power On the System for the First Time" on page
4. Power on the server from a keyboard using the ILOM software. See
the System for Faults" on page
Related Information
"Configure the Host Software" on page 10
■

▼ Configure the Host Software

1. Configure the Solaris OS. See
The Solaris OS is preinstalled on the servers. When you power on, you are
automatically guided through the Solaris OS configuration procedure.
2. Install any required patches to the server.
Refer to the Sun SPARC Enterprise T5140 and T5240 Servers Product Notes for a list
of required patches.
3. Load additional software from the Solaris media kit (optional).
The Solaris media kit (sold separately) includes several CDs containing software
to help you operate, configure, and administer your server. Refer to the
documentation provided with the media kit for a complete listing of included
software and detailed installation instructions.
Related Information
"Cabling Notes for Both Servers" on page 10
■
Sun SPARC Enterprise T5140 and T5240 Servers Product Notes
■

Cabling Notes for Both Servers

Minimum cable connections for the servers:
■
■
■
■
■
10 Sun SPARC Enterprise T5140 and T5240 Servers Installation Guide • December 2010
At least one system on-board Ethernet network connection (NET port)
Service processor serial management port (SER MGT port)
Service processor network management port (NET MGT port)
Power cables for the two system power supplies
43.
55.
"Booting the Solaris Operating System" on page
Step 3 in
"Examine
58.