Table of Contents
Advertisement
4. Connect the -48V or -60V return to the -48V or -60V wires to the circuit breaker.
5. Connect the power wiring to the server by plugging each power cable into the
server power supply units.
6. When you are ready to power up the server, close the circuit breaker and follow
the booting procedure described in
Related Information
"Assembling and Installing the DC Input Power Cables" on page 83
■
92
Sun SPARC Enterprise T5140 and T5240 Servers Installation Guide • December 2010
"Powering On the System" on page
41.
Advertisement
Table of Contents
Need help?
Do you have a question about the Sun SPARC Enterprise T5140 and is the answer not in the manual?
Questions and answers