Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-1
Operation
Chapter 3
Operation
This section describes the operational features of the Compaq ProLiant Storage
System /U.
Powering up the System
Turn ON the ProLiant Storage System /U before turning on the server (or
servers) connected to storage system. Any drives in the storage system must be
available when the server controlling them is powered up. This is especially
important on systems using fault-tolerant data protection schemes.
The ProLiant Storage System /U is powered up with the power switch in the
upper left corner of the front panel (upper right on rack systems).
NOTE: Allow a few seconds for the power-on routine to complete and the Power
indicator to turn green before using the storage system.
Status Indicators
The ProLiant Storage System /U system is equipped with a series of status
indicators located on strategic components. These indicators, with the
exception of those on the front panel, are related only to the individual
component.
Compaq ProLiant Storage System /U User Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ProLiant Storage System U1 and is the answer not in the manual?
Questions and answers