Connecting The Power - Compaq ProLiant Storage System U1 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-16 Installation of ProLiant Storage System /U

Connecting the Power

After all hardware components are installed and the unit is in place the power
may be connected.
1. Plug the AC power cord into the ProLiant Storage System /U. The
power supply automatically senses the input voltage so that it is not
necessary to select the correct main voltage.
TROJ011.EPS
Figure 2-14. Connecting the power cord
!
2. Plug the power cord into a nearby grounded outlet.
3. If a redundant power supply option has been installed, plug its AC
power cord into the power supply and then into a grounded outlet.
WARNING:
To reduce the risk of electric shock or damage to the
equipment:
Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
Plug the power cord into a grounded electrical outlet that is easily
accessible at all times.
Disconnect power from the storage system by unplugging all power cords
from either the electrical outlet or storage system.
Compaq ProLiant Storage System /U User Guide