Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-13
Option Installation
Single Bus Conversion
The Single Bus Conversion option is offered for customers who want to
convert to a Model U1 single bus system. This option provides a drive cage for
seven hot-pluggable drives and I/O board that supports a single Wide-Ultra
SCSI-3 bus and essentially converts the system to a Model U1.
Option Kit Contents
Single Bus drive cage
Single Bus I/O board
Single Bus Quick Installation Instructions
Hardware for tower and rack configurations
Model and serial labels
Additional Materials Needed
Torx T-15 screwdriver
Compaq System Configuration Utility
Compaq Array Configuration Utility (arrayed systems only)
Preparing the Storage System
Perform the following steps to prepare the ProLiant Storage System /U for
installation of the Single Bus option.
1.
Back up all data on all drives in the storage system before beginning the
installation procedure.
2.
Perform a normal system shutdown.
3.
Turn OFF the server supporting the storage system.
4. Place the storage system in STANDBY.
5. Disconnect the SCSI cables from the storage system.
6. Disconnect the power cord(s) from the storage system.
Compaq ProLiant Storage System /U User Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ProLiant Storage System U1 and is the answer not in the manual?
Questions and answers