Table of Contents
Advertisement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-14
Introduction to the ProLiant Storage System /U
System Power
The system power in the ProLiant Storage System /U does not completely shut
off with the power switch. The two positions of the front panel power switch
should be considered as ON and STANDBY, rather than ON and OFF. The
STANDBY position removes power from most of the electronics and the drives
but portions of the power supply and some internal circuitry remain active.
To completely remove all power from the system, you must disconnect the
power cord from the storage system. In systems with multiple power supplies,
you must disconnect all the power cords to completely remove power from the
system.
WARNING: To reduce the risk of electrical shock or damage to the
equipment, disconnect power from the storage system by unplugging all
power cords from either the electrical outlet or the storage system.
Compaq ProLiant Storage System /U User Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ProLiant Storage System U1 and is the answer not in the manual?
Questions and answers