Promise Technology SmartStor NAS Product Manual page 24

SmartStor NAS Product Manual
5. In the New IP Address field, type the IP address of the UNIX or Linux PC
from which you will access this folder, then click the Add button.
6. Click the OK button in the confirmation box.
On the UNIX/Linux PC with Command Line Interface
1. Open a terminal window.
2. Create a new folder for the SmartStor. Type mkdir SmartStor and press
Enter.
3. Mount the SmartStor. Type mount SmartStor NAS IP/VOLUME1/PUBLIC/
SmartStor and press Enter.
Note that the IP address shown above is only an example.
Volume1 and Public refer to the default Volume and folder created during
setup. If you created a different volume or folder, use those names.
4. Change to the SmartStor directory. Type cd /SmartStor and press Enter.
You can now copy files to and from the folder on the SmartStor.
When you are done with the SmartStor, type cd; umount /SmartStor and
press Enter.
On the Linux PC with Graphic Desktop
This procedure is for a RedHat Enterprise Linux 4 configuration. If you run a
different version of Linux, you might have to adapt the procedure. See your OS
documentation.
1. From the Applications menu, choose Network Servers.
20