Promise Technology SmartStor NAS Product Manual page 185

4. Click the OK button.
5. In the confirmation box, click the OK button.
Click the Enable option button, then click the OK button to enable the buzzer,
then click the OK button in the confirmation box.
Enabling and Disabling the LED
The LED Setup tab enables you to turn on or off the SmartStor LED and set the
time schedule.
To activate the LED:
1. Click the Administration topic and choose the Management icon to expand
the Tree.
2. In the Tree, click the Buzzer&LED icon.
3. Click the LED setup tab and the Disable option button.
4. Click the Always ON button.
5. Click the OK button.
The LED is enabled.
To deactivate the LED:
1. Click the Always OFF button.
2. Click the OK button.
The LED is disabled.
To set the time period for turning on/off the LED:
1. Select the Daily button and select the time of day from the menus.
181
Chapter 6: WebPASM