Promise Technology SmartStor NAS Product Manual page 184

SmartStor NAS Product Manual
Click the OK button. The application plug-in installs automatically. The process
takes several minutes.
When the installation is done, WebPASM displays a notification dialog box.
7. In the confirmation box, click the OK button.
Removing Plug-ins
There are two reasons to remove a plug-in:
To replace the old plug-in with a new one
․
You know that you will never use the plug-in
․
Before you remove a plug-in, consider disabling it, instead. See "Enabling and
Disabling Application Plug-ins" on page 151.
To remove a plug-in from SmartStor:
1. In the Tree, click the + beside the Management icon.
2. In the Tree, click the System Upgrade icon, then click the Delete Plug-in
tab.
3. Click the option button to the left of the plug-in you want to delete.
4. Click the OK button.
5. In the confirmation box, click the OK button.
Enabling and Disabling the Buzzer
The SmartStor has a buzzer that sounds when the SmartStor is finished booting
and when a problem is detected. The buzzer is enabled by default.
Promise recommends that you leave the buzzer enabled.
To disable the buzzer:
1. Click the Administration topic and choose the Management icon to expand
the Tree.
2. In the Tree, click the Buzzer&LED icon.
3. Click the Buzzer setup tab and the Disable option button.
Do not disconnect the power or shut down the SmartStor while
the plug-in installation is running!
Warning
180