Promise Technology SmartStor NAS Product Manual page 181

See your Network Administrator for help with these settings.
To set up SMTP authentication:
1. Click the Administration topic and choose the Management icon to expand
the Tree.
2. In the Tree, click the Mail Alert icon.
3. Click the Setup tab.
4. Next to Service, click the Enable option button.
5. In the SMTP Server field, type the IP address or the DNS name of your
SMTP server.
6. Optional. Type a new number in the Command Port field.
25 is the default number.
7. In the From field, the sender's email address that you want to appear in the
alert messages.
8. Next to SMTP Authentication:
Click the Yes option button to enable authentication.
․
Click the No option button to disable authentication.
․
Note that most SMTP servers require authentication.
9. If you enabled authentication, to the following:
In the User Name field, type the mail server account name.
․
In the Password field, type the password of the mailer server account.
․
10. Click the OK button.
11. In the confirmation box, click the OK button.
Sending a Test Message
Before you can send a test message, you must set up SMTP authentication and
have at lease one email alert recipient.
To send a test email message:
1. Click the Administration topic and choose the Management icon to expand
the Tree.
2. In the Tree, click the Mail Alert icon.
3. Click the Setup tab.
4. Click the Test button.
177
Chapter 6: WebPASM