5. Choose a Setup Mode and click the button:
One Click Setup - Loads a collection of default settings.
․
Recommended for most users.
Advanced Setup - Enables you to make your own settings.
․
Recommended for advanced users.
One Click Setup
To configure your NAS system using One Click Setup:
1. Go to the Main Window.
See "Opening SmartNAVI" on page 37.
2. Click the Setup Wizard icon.
3. Click the One Click Setup button.
4. Click the OK button to continue.
5. Click the Yes button in the confirmation box.
The NAS reboots. Then your RAID volume is ready.
The PUBLIC folder on the RAID Volume appears under My Computer as a
network drive.
You are finished with the setup.
If you chose Advanced Setup, continue under "Advanced Setup" on page
40.
39
Chapter 5: SmartNAVI