Checking Enclosure Status In Webpasm - Promise Technology SmartStor NAS Product Manual

SmartStor NAS Product Manual
Reported Event
Migration or Rebuilding on array X
aborted at Y%
Migration or Rebuilding on array X
aborted at Y% because of error.
RAID status: "OFFLINE".
The SmartStor NAS X volume Y is
offline.
RAID status: "CRITICAL".
The SmartStor NAS X volume Y
is not functioning correctly.
RAID X had some errors.
Formatting was aborted!

8.8 Checking Enclosure Status in WebPASM

To check Enclosure status:
1. Start WebPASM.
2. Click the Administration topic and choose the System icon to expand the
Tree.
3. In the Tree, click the System Information icon.
4. Click the Enclosure Information tab.
See Figure 5.
Corrective Action
RAID Volume Migration or Rebuild
was aborted (stopped) by user
action.
RAID Volume Migration or Rebuild
has aborted (stopped) because of an
error. Check the disk drives.
See page 217. Check the RAID
Volume. See page 217.
Check the disk drives. See page 217.
Replace the failed drive. See page
217. Create a new RAID Volume.
See page 158.
Check the disk drives. See page 217.
Replace the failed drive. See page
217. The RAID Volume will rebuild
automatically.
Check the disk drives. See page 217.
Replace the failed drive. See page
217.
224