Promise Technology SmartStor NAS Product Manual page 226

SmartStor NAS Product Manual
Reported Event
NAS Replication
NAS replication is completed.
System is busy. NAS replication is
abort!
System is doing another replication.
NAS replication is abort!
NAS replication is failed!
Snapshots
The snapshot capacity usage which
timestamp is [date and time] of
volume X is over 90%.
System is busy. Snapshot creation
was aborted!
System is creating another snapshot.
Snapshot creation was aborted!
System (enclosure)
System is starting to work. Normal.
System is rebooting.
System is shutting down.
System was shut down abnormally.
CPU temperature is higher than
58°C/138°F.
System will shut down.
Corrective Action
NAS replication has finished. Normal.
The RAID Volume is currently
formatting, rebuilding, or migrating.
Wait until this process is done. Then
try the replication again.
The SmarStor is currently doing a
replication. Wait until the current
replication is done. Then try the
second replication again.
There is a failed network connection
between the two SmartStors. Correct
the problem and try again. See page
225.
Move the snapshot volume to
another storage location.
Or delete the snapshot and then
create a new one. See page 167.
The RAID Volume is currently
formatting, rebuilding, or migrating.
Wait until this process is done. Then
try the snapshot again.
The SmarStor is currently doing a
snapshot. Wait until the current
snapshot is done. Then try the
second snapshot again.
Normal.
The SmartStor shut down incorrectly
the last time.
See "Shutting Down the SmartStor"
on page 188.
Allow the SmartStor to cool for
several minutes. Then restart the
SmartStor and check system
temperature and fan operation. See
page 191.
Be sure there is adequate air
circulation around the SmartStor.
222