Figure 8. SmartStor front and back views
Power
Connection
2. Disconnect the power cable from the SmartStor.
3. Wait 10 seconds, then reconnect the power cable.
4. Press the Power button.
It takes about a minute to boot the SmartStor. When fully booted:
The System Status LED turns the normal status color.
․
The buzzer beeps one time.
․
5. Verify that the SmartStor now appears in SmartNAVI Main window.
The SmartStor automatically runs a File System Check due to the abnormal
shutdown. During the File System Check, the System Status LED blinks
amber and the Disk Activity LEDs blink blue/green. See page 219 for more
information.
8.11 Checking Your Email Inbox
If you enabled Mail Alert in WebPASM, the SmartStor will send you an email
message when a problem arises. Look for a message from "root."
Disk Activity LED
System Status
LED
Power Button
229
Chapter 8: Troubleshooting