Promise Technology SmartStor NAS Product Manual page 138

Smartstor nas disk storage system
Table of Contents

Advertisement

SmartStor NAS Product Manual
System Fan Speed
Setting up SmartStor with the Setup Wizard
If you used the SmartNAVI Setup Wizard to set up your SmartStor, you do not
need to run the Setup Wizard in WebPASM.
If you have not yet set up your SmartStor:
1. Click the Administration topic and choose the Monitor & Wizard icon to
expand the Tree.
2. In the Tree, click the Setup Wizard icon to display the Setup Wizard screen.
3. The Setup Wizard screen appears.
The Setup Wizard tab enables you to modify the network parameters of the
SmartStor.
Changing the Default Computer Name
1. Click the Administration topic and choose the Monitor & Wizard icon to
expand the Tree.
2. In the Tree, click the Setup Wizard icon.
3. Under network setting, enter a name for the SmartStor in the Computer
Name field. Use only letters, numbers, and the underscore character for the
name.
4. Click the OK button.
5. In the confirmation box, click the OK button.
Setting Network Configuration
You can configure your network connection automatically. This option requires
you to have a DHCP server on your network. If you do not have a DHCP server,
use the manual configuration as below.
1. Click the Administration topic and choose the Monitor & Wizard icon to
expand the Tree.
2. In the Tree, click the Setup Wizard icon.
134

Advertisement

Table of Contents
loading

Table of Contents