Table of Contents
Advertisement
VSky A1100 Product Manual
c
OnfigUratiOn
E-mail Notification
Set up email notification to receive alerts and notices of important and critical events via email. See "Events that
trigger email notification" on page 96 for a summary of what conditions result in an email notification to be sent.
To configure email notification, from the VSky Home page, click on the Configuration menu tab, then click the
E-Mail Notification button. Email notification must be setup for each individual node in a cluster.
Note
Email notification is configured on each node individually.
Enter the following information:
E-mail Address List: Type or paste email addresses
to receive notifications. Separate each address by a
comma.
E-Mail Sender: Enter the email address from which
notifications originate.
SMTP Server Address: IP address of the SMTP
server. To make sure the VSky server has access to the
SMTP server by testing the configuration. Click the Send
a test email ... option below.
If authorization is required (normally it is), click to enable
Requires Authorization, and enter the user account and
password below.
Accounts: Enter the user account name for the email
sender address.
Password: Enter the password for the sender email
account.
Click the Send a test mail after saving the setting option box and click the Done button. Then check the
receiver email account(s) to see if the message was received. If the notification fails, check IP settings and
network configuration to make sure VSky can access the SMTP server.
EVENTS THAT TRIGGER EMAIL NOTIFICATION
The table below provides a summary of the conditions or events that trigger an email notification. The events
that will trigger email notification are OSD usage exceeds 85%, OSD down, OSD out (includes if cluster node is
down), and Cluster down.
t
aSkS
92
Promise Technology, Inc.
Advertisement
Table of Contents
