Local Settings; Camera Info; Factory Default - FLIR ThermaCAM E4 Operator's Manual

9.4.9.3

Local settings

10382203;3
Figure 9.24 Local settings dialog box
Figure 9.25 Explanations of the Local settings dialog box
Label
Language
Video output
Temp unit
Date format
Time format
Shutter period
9.4.9.4

Camera info

The camera info panel shows information about memory usage, battery status, serial
numbers, software revisions, etc.
No changes can be made.
9.4.9.5

Factory default

Point to Factory default and press MENU/YES to reset all camera settings to factory
settings.
Publ. No. 1 558 017 Rev. a62 – ENGLISH (EN) – August 19, 2004
Explanation
Configuration-dependent
NTSC
■
PAL
■
°C – degrees Celsius or
■
°F – degrees Fahrenheit
■
YYYY-MM-DD
■
YY-MM-DD
■
MM/DD/YY
■
DD/MM/YY
■
24 hour
■
AM/PM
■
Press the navigation pad left/right to set the shutter period:
Normal: Camera calibration at least every 15th minute
■
Short: Camera calibration at least every 3rd minute
■
9.4 – Menu system
41