Command Interface; Command Interface Post Commands - CyberData 11304 Operation Manual

2.12 Command Interface

Some functions on the device can be activated using simple POST commands to the web interface.
The examples in
can send HTTP POST commands to the device should work.

2.12.1 Command Interface Post Commands

Note
Device Action
Trigger relay (for configured delay)
Place call to extension (example: extension 130)

b
Place point-to-point call
(example: IP phone address = 10.0.3.72)
Terminate active call
Force reboot
Test Audio button
Announce IP address
Play the "0" audio file
Play the "1" audio file
Play the "2" audio file
Play the "3" audio file
Operations Guide
Table 2-23 use the free unix utility, wget commands. However, any program that
These commands require an authenticated session (a valid username and password to
work).
Table 2-23. Command Interface Post Commands
930947A
a
HTTP Post Command
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"test_relay=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"call=130"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"call=10.0.3.72"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"terminate=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"reboot=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"test_audio=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"speak_ip_address=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_0=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_1=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_2=yes"
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_3=yes"
Installing the VoIP Emergency Intercom
Command Interface Post Commands
CyberData Corporation
64