CyberData 11304 Operation Manual page 30

3. On the Home Page, review the setup details and navigation buttons described in
Web Page Item
Device Settings
Device Name
Change Username
Change Password
Re-enter Password
Current Settings
Serial Number
Mac Address
Firmware Version
IP Addressing
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
Speaker Volume
Microphone Gain
SIP Mode is
Multicast Mode is
Event Reporting is
Nightringer is
Primary SIP Server
Backup Server 1
Backup Server 2
Singlewire Settings
Boot Time
Current Time
IC Server
Configuration File
B'casts Accepted
B'casts Rejected
B'casts Active
RTP Packets Rx'd
Operations Guide
Table 2-6. Home Page Overview
Description
Shows the device name.
Type in this field to change the username.
Type in this field to change the password.
Type the password again in this field to confirm the new password.
Shows the device serial number.
Shows the device Mac address.
Shows the current firmware version.
Shows the current IP addressing setting (DHCP or static).
Shows the current IP address.
Shows the current subnet mask address.
Shows the current default gateway address.
Shows the current DNS Server 1 address.
Shows the current DNS Server 2 address.
Shows the current speaker volume level.
Shows the current microphone gain level.
Shows the current status of the SIP mode.
Shows the current status of the Multicast mode.
Shows the current status of the Event Reporting mode.
Shows the current status of the Nightringer mode.
Shows the current status of the Primary SIP Server.
Shows the current status of Backup Server 1.
Shows the current status of Backup Server 2.
Shows the boot time.
Shows the current time.
Shows the InformaCast server IP addresses.
Shows the configuration file.
Shows the number of B'casts accepted.
Shows the number of B'casts rejected.
Shows the number of active B'casts.
Shows the number of RTP packets Rx'd.
930947A
Installing the VoIP Emergency Intercom
Log in to the Configuration Home Page
Table
CyberData Corporation
23
2-6.