CyberData 11304 Operation Manual page 52

2. On the Audio Configuration page, enter values for the parameters indicated in
Web Page Item
Audio Files
0-9
Dot
Audiotest
Page tone
Your IP Address is
Rebooting
Restoring default
Ringback tone
Ring tone
Intrusion Sensor Triggered Corresponds to the message "Intrusion Sensor Triggered" (24 character limit).
Door Ajar
Night Ring
Operations Guide
Table 2-15. Audio Configuration Parameters
Description
The name of the audio configuration option is the same as the spoken audio that
plays on the board (24 character limit).
'0' corresponds to the spoken word "zero."
'1' corresponds to the spoken word "one."
'2' corresponds to the spoken word "two."
'3' corresponds to the spoken word "three."
'4' corresponds to the spoken word "four."
'5' corresponds to the spoken word "five."
'6' corresponds to the spoken word "six."
'7' corresponds to the spoken word "seven."
'8' corresponds to the spoken word "eight."
'9' corresponds to the spoken word "nine."
Corresponds to the spoken word "dot." (24 character limit)
Corresponds to the message "This is the CyberData IP speaker test message..."
(24 character limit)
Corresponds to a simple tone used for beep on initialization and beep on page (24
character limit).
Corresponds to the message "Your IP address is..." (24 character limit).
Corresponds to the spoken word "Rebooting" (24 character limit).
Corresponds to the message "Restoring default" (24 character limit).
This is the ringback tone that plays when calling a remote extension 
(24 character limit).
This is the tone that plays when set to ring when receiving a call 
(24 character limit).
Corresponds to the message "Door Ajar" (24 character limit).
Specifies the ringtone for nightring. By default this parameter uses the same audio file
that is selected for the Ring Tone parameter.
The Browse button will allow you to navigate to and select an audio file.
The Play button will play that audio file.
The Delete button will delete any user uploaded audio and restore the stock audio
file.
The Save button will download a new user audio file to the board once you've
selected the file by using the Browse button. The Save button will delete any pre-
existing user-uploaded audio files.
930947A
Installing the VoIP Emergency Intercom
Configure the Audio Configuration Parameters
CyberData Corporation
45
Table 2-15.