CyberData 11304 Operation Manual page 69

5. Select Browse, and then navigate to the location of the Intercom firmware file.
6. Click Submit.
Note
Note
Table 2-22
Operations Guide
CyberData Emergency Intercom
Do not reboot the board after pressing the Submit button.
This starts the upgrade process. Once the Intercom has uploaded the file, the Uploading
Firmware countdown page appears, indicating that the firmware is being written to flash.
The Intercom will automatically reboot when the upload is complete. When the countdown
finishes, the Upgrade Firmware page will refresh. The uploaded firmware filename should
be displayed in the system configuration (indicating successful upload and reboot).
shows the web page items on the Upgrade Firmware page.
Table 2-22. Firmware Upgrade Parameters
Web Page Item
File Upload
Firmware Version
Figure 2-30. Upgrade Firmware Page
Description
Shows the current firmware version.
Use the Browse button to navigate to the location of the
Intercom firmware file that you want to upload.
Click on the Submit button to automatically upload the selected
firmware and reboot the system.
930947A
Installing the VoIP Emergency Intercom
Uploading the Firmware
CyberData Corporation
62