CyberData 11304 Operation Manual page 44

2. On the Nightringer Configuration page, enter values for the parameters indicated
Web Page Item
Enable Nightringer
Nightringer Settings
SIP Server
Remote SIP Port
Local SIP Port
Outbound Proxy
Outbound Proxy Port
User ID
Authenticate ID
Authenticate Password
Re-registration Interval (in seconds)
Note
Operations Guide
in Table 2-12.
Table 2-12. Nightringer Configuration Parameters
You must click on the Save button and then the Reboot button for the changes to take
effect.
Description
When the nightringer is enabled, the unit will attempt to
register a second extension with the SIP server. Any calls
made to this extension will play a ringtone.
Type the SIP server represented as either a numeric IP
address in dotted decimal notation.
Type the Remote SIP Port number (default 5060)
(8 character limit).
Type the Local SIP Port number (default 5060)
(8 character limit).
Note: This value cannot be the same as the
found on the SIP Configuration
Type the Outbound Proxy as either a numeric IP address in
dotted decimal notation or the fully qualified host name 
(255 character limit [FQDN]).
Type the Outbound Proxy Port number (8 character limit).
Type the User ID (up to 64 alphanumeric characters).
Type the Authenticate ID (up to 64 alphanumeric
characters).
Type the Authenticate Password (up to 64 alphanumeric
characters).
The SIP Registration lease time (in seconds).
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
930947A
Installing the VoIP Emergency Intercom
Configure the Nightringer Parameters
Local SIP Port
Page.
CyberData Corporation
37