CyberData 11304 Operation Manual page 61

2. On the Autoprovisioning Configuration page, you may enter values for the parameters
Web Page Item
Autoprovisioning
Enable Autoprovisioning
Get Autoprovisioning from DHCP
Download Protocol
Autoprovisioning Server (IP Address)
Autoprovisioning Filename
Autoprovisioning Autoupdate 
(in minutes)
Autoprovision at time (HHMMSS)
Autoprovision when idle
(in minutes > 10)
Clock
NTP Server
Posix Timezone String
Set Time with External NTP Server on boot When selected, the time is set with an external NTP server when the device
Periodically update with time server
Time update period (in hours)
Current Time
Current Time in 24 hour format (HHMMSS) Allows you to input the current time in the 24 hour format. (6 character limit)
3. After changing the parameters, click the Save button.
Operations Guide
indicated in Table 2-17.
Table 2-17. Autoprovisioning Configuration Parameters
See Section 2.10.12.1,
See Section 2.10.12.1,
Allows you to select whether the autoprovisioning file is acquired via TFTP or
HTTP.
See Section 2.10.12.1, "Autoprovisioning"
Type the desired name for the autoprovisioning file.
Type the desired time (in minutes) that you want the Autoprovisioning feature to
update (6 character limit).
Note: A value of 0 will disable this option.
Type the desired time of day that you want the Autoprovisioning feature to update
(must be 6 characters).
Note: An empty value will disable this option.
Type the desired time (in minutes greater than 10) that you want the
Autoprovisioning feature to update after a certain amount of idle time (6 character
limit).
Note: A value of 0 will disable this option.
Press the Get Autoprovisioning Template button to create an autoprovisioning
file for this unit. See
Allows you to select the NTP server (64 character limit).
See Section 2.10.12.3, "Time Zone Strings"
restarts.
When selected, the time is periodically updated with a time server.
Allows you to select the time updated period (in hours) (4 character limit).
Allows you to set the time from the NTP server.
Click on this button to set the clock after entering the current time.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Description
"Autoprovisioning".
"Autoprovisioning".
Section 2.10.12.2, "Get Autoprovisioning Template Button"
930947A
Installing the VoIP Emergency Intercom
Configure the Autoprovisioning Parameters
(15 character limit).
(43 character limit).
CyberData Corporation
54