Set Operation Mode [Press 5] - Tadiran Telecom Emerald ICE Installation Manual

Set Operation Mode [Press 5]

Under normal conditions, the pre-programmed Automated Attendant screen
controls the greeting that plays when Emerald ICE Flash Voice Mail System answers
a caller. This screen tells Emerald ICE Flash Voice Mail System which greeting to
play based upon the time of day, Day or Night, which is programmed in the
Open/Close Schedule Screen (Figure 8).
There may be a time when it is desirable to change the system from Day (Mode 1) to
Night (Mode 2) mode at an other than normal time. The System Administrator can
accomplish this by dialing into the system, rather than having to access the
programming terminal.
When the mode is changed manually to either Mode 1 or Mode 2, Emerald ICE Flash
Voice Mail System stays in that mode until the System Administrator changes the
mode back to Automatic mode through the Administration Options menu. The mode
cannot be changed from the programming terminal.
System Mode Numbers
Mode 1 - Fixed Day Mode:
Mode 2 - Fixed Night Mode:
Mode 3 - Automatic Mode:
programmed
the system remains in Day Mode all the time
the system remains in Night Mode all the time
the system follows the Open/Close times as
ICE Voice Mail Card Installation & Maintenance Manual
6-11