Initialization And Pbx Integration; Figure 5. System Initialization Screen - Tadiran Telecom Emerald ICE Installation Manual

Digital key telephone system

Hide thumbs Also See for Emerald ICE:

Table of Contents

Figure 5.

System

Initialization Screen

Initialization and PBX Integration

Two steps need to be accomplished initially after Emerald ICE Flash Voice Mail

System card has been installed, powered-up and synchronized.

1. Initialization.

2. Configuration of the correct PBX integration.

Initialization prepares the system for programming, setting up all the default data

tables.

Selecting the PBX creates the default mailbox numbers and programs the necessary

codes for the selected PBX system. These pre-programmed mailbox numbers and

PBX codes may be modified as desired for specific site requirements.

Initializing the System

Select 13- System Initialization from the Programming Main Menu (Figure 4) and

then press e. A confirmation message, "Initializing system & erasing all

messages. Are you sure?" will appear as shown below in Figure 5 indicating that all

tables will be reset.

ICE Voice Mail Card Installation & Maintenance Manual

5-3

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the Emerald ICE and is the answer not in the manual?

Emerald