Examples Of Adding And Deleting Mailboxes - Tadiran Telecom Emerald ICE Installation Manual

Examples of Adding and Deleting Mailboxes

Add a mailbox
To add a mailbox, from the Main Menu press 9 to enter Mailbox Assignments.
Move the cursor bar down to the first available line.
Enter the new mailbox information in this order:
1. The desired mailbox number.
2. The access code if available, otherwise 0000.
3. The PBX extension number to be associated with this mailbox.
4. The desired Class of Service (1-4).
5. The Dial Out permission On or Off as desired.
6. The Beeper No. if Dial Out is set to On.
7. The mailbox user's first and last names in order with a space between them.
Once you have finished entering mailboxes, press E to save your changes and
return to the Programming Menu.
5-26
ICE Voice Mail Card Installation & Maintenance Manual
A system can use 2-digit, 3-digit, or 4-digit mailbox numbers. However, a system
cannot contain mailboxes using a combination of 2, 3, and 4-digit lengths.
For example, if 2-digit numbering is used, then all mailboxes must be numbered with
2 digits.
When selected, the PBX integration will set the number of mailbox digits for the
standard configuration of the extension numbers for the selected PBX. If the PBX
extension numbers are of a different length, then you will need to adjust the Mail
Box Length entry in the Integration screen to match the PBX extension length. If
this value is changed, you will need to manually enter the required mailboxes.