Tadiran Telecom Emerald ICE Installation Manual page 76

Choice 2 - Adding a Mailbox
When you add a mailbox to the system, several default values are assigned: the
extension number will be the same as the mailbox number, the password will be
0000, the Class of Service will default to 1 and the Outcall function will be turned
OFF. If you need to change these options from the default values, you will have to
use the Programming Terminal.
To add a mailbox, perform the following steps:
1. Access the System Administratorʹs Mailbox as described on page 6-1. The
2. Dial 2 for Mailbox Administration. You will be prompted to enter the mailbox
3. At the next prompt, press 2 to add the mailbox. The system will confirm the
4. You may then enter another mailbox number to add or press * to exit this
6-6
ICE Voice Mail Card Installation & Maintenance Manual
Administrator's Options Menu now plays.
number. This will be the mailbox that you want to add to the system. For
example, to add Mailbox 30, press 30.
new mailbox has been added: "Mailbox thirty is located in Table Entry xx". (The xx
will vary according to the current mailbox layout in the system and will be
assigned automatically. You do not have to enter any number here.)
function. If you enter another mailbox number you will be returned to Step 5 or
if you press * you will be returned to Step 2. You may now:
a. Press 1-9 .... to select another System Administrator task to perform
b. Press *.......... to return to the system Main CCR Menu
c. Press **...... to exit the system completely