Section 4 Web User Interface Programming
4.7.3.5 Reorder Tone
Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
Value Range
Default Value
Configuration File Reference
4.7.4 Telephone Settings
This screen allows you to configure various telephone settings.
4.7.4.1 Telephone Settings
Number Matching Lower Digit
Description
120
Administrator Guide
Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
480,620
REORDER_TONE_FRQ (Page 169)
Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
60,250,190
REORDER_TONE_TIMING (Page 169)
Specifies the minimum number of digits with which to match a
phonebook entry with an incoming call's caller ID. To specify exact
matching of entire numbers only, specify "0".
Document Version 2012-07