Http Authentication; Authentication Id; Authentication Password; Proxy Server Settings - Panasonic KX-UT670 Administrator's Manual

Section 4 Web User Interface Programming
Value Range
Default Value
Configuration File Reference

4.4.3.2 HTTP Authentication

Authentication ID

Description
Value Range
Default Value

Authentication Password

Description
Value Range
Default Value

4.4.3.3 Proxy Server Settings

Enable Proxy

Description
Value Range
Default Value
78 Administrator Guide
Max. 40 characters
Note
•
You cannot leave this field empty.
•
If "{mac}" is included in this field, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this field, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this field, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
HTTP_USER_AGENT (Page 155)
Specifies the ID for the User account. If set, this name must be entered
to access the Web user interface at the User access level.
Max. 127 characters
Not stored.
Specifies the password for the User account. If set, this password must
be entered to access the Web user interface at the User access level.
Max. 127 characters
Not stored.
Selects whether to use the proxy server.
Note
•
The unit's Web server proxy settings are also used for
provisioning and updating the firmware.
•
Yes
•
No
No
Document Version 2012-07