Overview Of Programming; Phone User Interface Programming; Changing The Language For Phone User Interface Programming - Panasonic KX-UT670 Administrator's Manual

Section 2 General Information on Programming

2.1 Overview of Programming

There are 3 types of programming, as shown in the table below:
Programming
Type
Phone user
interface
programming
Web user
interface
programming
Configuration file
programming

2.2 Phone User Interface Programming

You can change the settings directly from the unit.
For details about the operations, refer to the Operating Instructions on the Panasonic Web site (® see
Introduction).
For more details about phone user interface programming, see Section 3 Phone User Interface
Programming.
2.2.1 Changing the Language for Phone User Interface
Programming
You can change the language used on the LCD. Because the language settings for the LCD of the unit are
not synchronized, you must set the languages individually for the unit.
For details about changing the setting, refer to the Operating Instructions on the Panasonic Web site (® see
Introduction).
22 Administrator Guide
Description
Configuring the unit's settings directly from the unit
(via on the Phone screen or the
[Settings] menu).
Configuring the unit's settings by accessing the Web
user interface from a PC connected to the same
network.
Configuring the unit's settings beforehand by creating
configuration files (pre-provisioning), and having the
unit download the files from a server or an SD card and
configure its own settings (provisioning).
References
® 2.2 Phone User Interface
Programming
® Section 3 Phone User
Interface Programming
® 2.3 Web User Interface
Programming
® Section 4 Web User
Interface Programming
® 2.4 Configuration File
Programming
® Section 5 Configuration
File Programming
Document Version 2012-07