REORDER_TONE_FRQ
Value Format
Description
Value Range
Default Value
Web User Interface Reference
REORDER_TONE_GAIN
Value Format
Description
Value Range
Default Value
REORDER_TONE_TIMING
Value Format
Description
Value Range
Default Value
Web User Interface Reference
RINGBACK_TONE_FRQ
Value Format
Description
Value Range
Default Value
Web User Interface Reference
Document Version 2012-07
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
480,620
Tone Frequencies (Page 120)
Integer
Specifies the gain, in decibels, of the reorder tone.
-24–6
0
Comma-separated Integer
Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
60,250,190
Tone Timings (Page 120)
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of ringback tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
440,480
Tone Frequencies (Page 118)
Section 5 Configuration File Programming
Administrator Guide
169