Dtmf_Relay_N; Televent_Payload; Rfc2543_Hold_Enable_N - Panasonic KX-UT670 Administrator's Manual

DTMF_RELAY_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
Web User Interface Reference

TELEVENT_PAYLOAD

Value Format
Description
Value Range
Default Value
Web User Interface Reference

RFC2543_HOLD_ENABLE_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
Document Version 2012-07
DTMF_RELAY_1, DTMF_RELAY_2, ..., DTMF_RELAY_6
Boolean
Selects whether DTMF tones are sent in the SIP INFO message.
•
Y
•
N
Note
•
If set to "Y", DTMF tones will be sent in the SIP INFO message.
•
If set to "N", the method selected in "OUTBANDDTMF_n" will be
used.
N
DTMF Relay (Page 102)
Integer
Specifies the RFC 2833 payload type for DTMF tones.
Note
•
This setting is available only when "OUTBANDDTMF_n" is set to
"Y".
96–127
101
Telephone-event Payload Type (Page 99)
RFC2543_HOLD_ENABLE_1, RFC2543_HOLD_ENABLE_2, ...,
RFC2543_HOLD_ENABLE_6
Boolean
Specifies whether to enable the RFC 2543 Call Hold feature on this line.
•
Y (Enable RFC 2543 Call Hold)
•
N (Disable RFC 2543 Call Hold)
Note
•
If set to "Y", the "c=0.0.0.0" syntax will be set in SDP when
sending a re-INVITE message to hold the call.
•
If set to "N", the "c=x.x.x.x" syntax will be set in SDP.
Y
Section 5 Configuration File Programming
Administrator Guide 183