Section 4 Web User Interface Programming
Value Range
Default Value
Configuration File Reference
Firmware File URL
Description
Value Range
Default Value
Configuration File Reference
4.8.2 Provisioning Maintenance
This screen allows you to change the provisioning setup to download the configuration files from the
provisioning server of your phone system.
Note
•
Each unit can accept up to 3 configuration files. For details about provisioning, see
2.4.3 Provisioning.
122
Administrator Guide
•
Yes
•
No
Yes
FIRM_UPGRADE_ENABLE (Page 143)
Specifies the URL where the firmware file is stored.
Note
•
This setting is available only when [Enable Firmware
Update] is set to [Yes].
•
Changing this setting may require restarting the unit.
Max. 500 characters
Not stored.
FIRM_FILE_PATH (Page 144)
Document Version 2012-07